Korg SV-1 / SV-2 Holder for iPad, Tablet, Controller, Keyboard and More
Expected Delivery on - .
- Short 220 mm / Black PETG - €45,00
- Short 220 mm / Black PLA - €40,00
- Short 220 mm / White - €40,00
- Short 220 mm / Red - €43,00
- Short 220 mm with connection / Black PETG - €45,00
- Short 220 mm with connection / Black PLA - €40,00
- Short 220 mm with connection / White - €40,00
- Short 220 mm with connection / Red - €43,00
- Long 260 mm / Black PETG - €50,00
- Long 260 mm / Black PLA - €45,00
- Long 260 mm / White - €45,00
- Long 260 mm / Red - €48,00
- 3 pieces, 260mm long, wider / Black PETG - €65,00
- 3 pieces, 260mm long, wider / Black PLA - €60,00
- 3 pieces, 260mm long, wider / White - €60,00
- 3 pieces, 260mm long, wider / Red - €63,00
Korg SV-1 / SV-2 Holder for iPad, Tablet, Controller, Keyboard and More
PRODUCT DETAILS
Looking for a holder for your Korg SV-1 or SV-2 to put your iPad or perhaps another small keyboard on? Then you've come to the right place!
The support surface comes in a longer version (260 mm) and a shorter version (220 mm). The short version is also available with an option to connect both sides.
For placing larger keyboards on top, I also offer a slightly wider version consisting of three parts – see pictures!
Please keep in mind that colours vary: red is not always the same red, and white is not always pure white!
Custom adjustments are of course possible, as always!
The holders are made using FDM 3D printing.
My recommendation is black PETG, which is already preselected: more resistant to heat and impact, ideal for use in the car, in direct sunlight or on stage. PLA remains available as the lower-priced option. Colours come from coloured filament, not from applied paint or lacquer.
| Property | PLA | PETG |
|---|---|---|
| Heat resistance | good, up to approx. 55–60 °C | very good, up to approx. 75–80 °C |
| Stability / impact resistance | stable, slightly more brittle | more flexible and impact-resistant |
| Use in the car / in the sun | more sensitive to strong heat | much more heat-resistant, recommended |
| Surcharge | included in the base price | +€5 per variant |
The holder is made of plastic and produced by 3D printing. You can find more information here: FAQ 3D printing
Other colours on request: surcharge €3!
Delivery time if in stock: 3 to 4 days
Delivery time if not in stock: 5 to 7 days


















