🎹 Buy more, pay less – from the 10th product onwards you automatically get a 15% discount.

Roland Fantom Installation Instructions

Step-by-step guide to importing sounds into the Roland Fantom (Fantom-6, Fantom-7, Fantom-8, Fantom-06, Fantom-07, Fantom-08, Fantom EX). Please read this guide through completely once before you start.

How the Fantom organises sounds

The Fantom organises sounds differently from, say, a Korg Kronos or Yamaha Montage:

  • Scene – complete setup with up to 16 Zones (equivalent to a Combination on Korg / a Performance on the Montage)
  • Zone – a single sound channel within a Scene (equivalent to a Timbre on Korg / a Part on the Montage)
  • Tone (Z-Core) – a single sound of the ZEN-Core engine (equivalent to a Program on Korg / a Part sound on the Montage)
  • Sample – audio recording (WAV), assigned to a Tone as its waveform

⚠️ Step 1 – Create a backup

Important: Always back up your current settings (Scenes, User Tones, Drum Kits, samples) first, before you import new sounds. That way you can return to the original state at any time.

  1. Plug a USB stick into the USB MEMORY port.
  2. Navigate to: [MENU] → UTILITY → BACKUP
  3. Enable INCLUDE PAD SAMPLE [E2] so that pad samples are backed up as well.
  4. Optional: change the file name via [E1] RENAME. Confirm with [E6] OK → [E5] OK.

Step 2 – Prepare the files

  1. Download the file via your download link. If the archive is zipped (.zip), unpack it completely.
  2. Format your USB stick on the Fantom itself so that it is recognised reliably: [MENU] → UTILITY → USB MEMORY FORMAT
  3. Copy all unpacked files to the USB stick. Do not rename them and do not create subfolders – copy the files straight into the root directory.
  4. Plug the USB stick into the USB MEMORY port of your Fantom.

Caution: Formatting erases all data on the USB stick! Ideally use an empty stick or one reserved for this purpose.

Step 3 – Import a Scene with Tone and samples

Use this method if you have received a complete Scene with its own sample-based Tone.

Import the Scene:

  1. [MENU] → UTILITY → IMPORT
  2. Select the Scene you want (e.g. “Uptown Funk”). Confirm with <Select>.
  3. Place the Scene on the first free memory location and confirm.

Import the Tone (Z-Core) with samples:

  1. [MENU] → UTILITY → IMPORT → Import Tone Z-Core
  2. Select the Tone that contains the samples – look for the note “with samples” next to the name. Confirm with <Next>.
  3. Import the Tone into a free User Tone memory location (e.g. slot 91).

Correct the assignment:

  1. Switch to the Zone View (press [ZONE VIEW]).
  2. Select the Zone that uses the sample sound.
  3. Change the assigned Tone to the Tone you have just imported (e.g. slot 91).
  4. Save all changes – both the Tone and the Scene (see step 5).

Step 4 – Import only the sample set (alternative)

Use this method if you have already imported the Scene but only want to load the sample data afterwards.

  1. [MENU] → UTILITY → IMPORT → Import Sample
  2. Select the pure sample file (not the Tone). Highlight the samples you want and confirm with <Next>.
  3. Import the samples to the next free memory locations.
  4. In the Scene, navigate to the sound that needs the samples.
  5. [MENU] → Tone Edit → OSC (Oscillator)
  6. Use the dial to select the correct sample set until the song name appears in the display.
  7. Be sure to save every Tone individually as well as the entire Scene (see step 5).

⚠️ Step 5 – Save

Important: The Fantom does not save imported data automatically! If you switch the instrument off without saving, all changes are lost. Order: always the Tones first, then the Scene.

Save the Tone: Go to the Tone Edit section and press [WRITE]. Enter a name if needed and confirm the save.

Save the Scene: In the SCENE SELECT display, press the [WRITE] button. Choose the memory location you want and confirm.

Tip: The Scene refers to the Tones – if the Tones are not saved, the Scene points to nothing the next time it is loaded.

Common questions and problems

  • USB stick is not detected: Format the stick directly on the Fantom ([MENU] → UTILITY → USB MEMORY FORMAT), do not use a USB hub, max. 32 GB.
  • Import function not available: Check the firmware – the import functions were added with later updates. The current firmware is on the Roland website.
  • Scene sounds different than expected: Check whether the correct Tone with samples is assigned (Zone View). Check that Master EQ and effects are at their default values.
  • Samples missing after import: Probably only the Scene was imported, not the Tone with samples – carry out step 3 completely.
  • Memory full: Delete User Tones or Scenes you don't need (back up first!).
  • Download link doesn't work: The link is valid only once – just get in touch and you'll get a new link.

Stuck?

Then let's install the sound together: in the 1:1 Installation Service I walk you through the steps by phone, Teams or FaceTime – 15 minutes for €15, 30 minutes for €30.

Questions about your order or the download?
E-mail: kontakt@thorsten-hillmann.de
Phone: +49 1523 174 2964
Shop: keyboard-sounds.com
YouTube: youtube.com/@thkeyboardsounds

    Special instructions for seller
    Add A Coupon

    What are you looking for?