The Korg Kronos PCG storage system and its challenges
Introduction:
When you first try to load external sounds into the Korg Kronos, Nautilus, or Oasys, you'll find it's not as easy as you thought. The reason lies in the static reference system of the PCG files, which causes problems when switching between devices, especially from the Kronos to the Nautilus, but also within a single device when you want to change memory locations.
What is a PCG file?
A PCG file contains important data such as programs, combinations, drum kits, and global settings. The main problem lies in the fixed references to the memory locations of the samples. 
Here we can see that a program references specific samples. If you move or copy the program, the sound does not change.

If the sample is moved or replaced, the reference remains at position 001 and plays the new sample.
The same "problem" arises when looking at the Programs from a Combination perspective.

Here too, we see that if we move or copy the combination, the downward reference remains. However, if we move a program, the reference stays at number B024 and plays the sound of the program that is now located there.

The problem and possible solutions:
Korg uses a static reference system that assigns programs and combinations to fixed memory locations. This can cause problems, especially when sample IDs differ between devices. For example, string sounds might be located at position 001 on one device, but marimbas on another. This is the case, for instance, between the HD1 engine in the Kronos and the Nautilus.
Possible solutions:
- Overwriting programs: Overwriting existing programs on the new device is possible, but risky.
- Manual reassignment: Save new programs to free memory locations and manually adjust the references in the combinations.
Important:
Regular backups are essential. Never download PCG files from other sources without backing them up first. More tips on manually adjusting references will be available soon in a new video!
For more exclusive content and sound packs, visit keyboard-sounds.com .
Related tags:
#KorgKronos #PCGFile #SoundManagement #KeyboardSetup #Music Production #KeyboardTutorial #KorgNautilus
-
Posted in
Keyboard Setup, Keyboard Tutorial, Korg Kronos, Korg Nautilus, Korg Oasys, Musikproduktion, PCG File, Sound Management





Hi Ralf,
aufmachen, Ram Bausteine auf korrekten Sitz prüfen und alle Stecker nachdrucken. Einmal vorsichtig aussaugen.
Wenn das nicht hilft, hilft leider nur die Werkstatt 🙁
Kronos 1 oder 2?
Mein Kornos stürzt neuerdings ab. Problem hatte ich seit Jahren nicht.
Meldung: “ a Problem hast detected“
Dann soll ich neu starten.
Hast Du eine Lösung ?
Liebe Grüße und schon mal danke
Ralf Thilmany